Global Innovator in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

Cable entry plate KDP plastic rectangular

Cable entry plate KDP plastic  rectangular

The type KDP/N 24, KDP/X 24, KDP/E 24 and KDP 24-Multi rectangular cable entry plates are a real alternative to cable fittings. The rectangular cable entry plates can be fitted directly into 24-pole connector cut-outs or mounted by means of adapter plates.

Cable entry plate KDP/N 24

Cable entry plate KDP/N 24

KDPN 2

2nd generation of our cable entry plates, plastic, square, with improved clip-in function.
Economical connection technology for tool-free wiring of equipment and machinery. Wherever the rapid and economical introduction of cables and/or pneumatic hoses in confined spaces is essential. The alternative to cable fittings.

Suitable for standard cut-outs for 24-pin Harting and Wieland plug connectors. For snap-in fastening and/or screwing in place.

  • Snap-in at plate thicknesses of 1.5 to 2.0 mm
  • High degree of strain relief
  • 2 elastomer panels (seals)

IP rating logo7 IP 65 Temperature rating10 -22 - 158°F

UV resistance logo3 UV resistant

KDPN-24-data-sheet.pdf 

3D-KDPN.zip

kdpn25

Cable entry plate KDP/X 24

Cable entry plate KDP/X 24

KDPE24

4th generation of our cable entry plates, plastic, square, with improved clip-in function and one instead of two elastomer plates. Economical connection technology for tool-free wiring of equipment and machinery. Wherever the rapid and economical introduction of cables and/or pneumatic hoses in confined spaces is essential. The alternative to cable fittings. Suitable for standard cut-outs for 24-pin Harting and Wieland connectors. For snap-in fastening and/or screwing in place.

  • Snap-in at plate thicknesses of 1.5 to 2.0 mm
  • High degree of strain relief

IP rating logo8 IP 65 UV resistance logo4 UV resistant

Temperature rating11 -22 - 158°F

KDPX-24-data-sheet.pdf

3D-KDPX.zip

kdpn26

Cable entry plate KDP/E 24

Cable entry plate KDP/E 24

KDPE24

3rd generation of our cable entry plates, plastic, square, with improved clip-in function and one instead of two elastomer plates.
Economical connection technology for tool-free wiring of equipment and machinery. Wherever the rapid and economical introduction of cables and/or pneumatic hoses in confined spaces is essential. The alternative to cable fittings. Suitable for standard cut-outs for 24-pin Harting and Wieland connectors. For snap-in fastening and/or screwing in place.

  • Snap-in at plate thicknesses of 1.5 to 2.0 mm
  • Lower strain relief
  • Introduction of larger cable diameters is possible
  • Introduction from both sides is possible

IP rating logo9 IP 65 UV resistance logo5 UV resistant

Temperature rating12 -22 - 158°F

KDPE-24-data-sheet.pdf

3D-KDPE-24.zip

kdpn27

Cable entry plate KDP/Z, plastic

Cable entry plate KDP/Z, plastic

The KDP/Z 16 and 24 cable entry plate is an entry and fastening system for cables and pneumatic hoses such as those used in control cabinets, plant or machine construction. Wherever quick assembly, cable-protection and high packing density are required, this cable entry plate can be used.

  • Enormous time savings in assembly
  • High packing density
  • Large wire diameter ranges
  • Good strain relief
  • Very flat design

IP rating logo10 IP 65 IP 66/67 UV resistance logo6 UV resistant

UL flame rating10 Frame V0 Seal HB

Temperature rating13 -22 - 158°F

2020-A-17-KDH-E481225-20191219-Certificate-of-Compliance.pdf

KDPZ-16-data-sheet.pdf

KDPZ-24-data-sheet.pdf

 

3D-KDPZ-24.zip

kdpz dim1kdpz dim2

Cable entry plate KDP/F 24

Cable entry plate KDP/F 24

The KDP/F 24 cable entry plate is an entry and fastening system for cables and pneumatic hoses such as those used in control cabinets, plant or machine construction. Wherever quick assembly, cable-protection and high packing density are required, this cable entry plate can be used.

  • Enormous time savings in assembly
  • High packing density
  • Large wire diameter ranges
  • Several cables may be fed through an opening together
  • Very flat design

KDPF-24.pdf

3D-KDPF-24.zip

Cable entry plate KDP/Z Rittal

Cable entry plate KDP/Z Rittal

The KDP/Z Rittal cable entry plate is an entry and fastening system for cables and pneumatic hoses such as those used in control cabinets, plant or machine construction. Wherever quick assembly, cable-protection and high packing density are required, this cable entry plate can be used.

  • Enormous time savings in assembly
  • High packing density
  • Large wire diameter ranges
  • Good strain relief
  • Very flat design

KDPZ-Rittal.pdf

Cable entry plate KDP 24-Multi

Cable entry plate KDP 24-Multi

The cable entry plates, type KDP -24-Multi are a combination of our KDP system and our cable entry strips KDL/E They are ideal for situations where a few cables with plugs have to be brought into the switch cabinet next to cables without plugs. The cable entry plates take up to four preassembled cables in two grommets.

KDP-24Multi-data-sheet.pdf

KDP-24-Multi-3D-CAD.zip

Displaying Metric Units

Your data. Our responsibility.
Thank you for your interest in our company. Data protection is of great importance for us because of our business activities!
We want you to know how much we value the protection of your data and privacy.
Our transparency documents in accordance with Art. 13 and 14 and 21 of the Basic Data Protection Ordinance (DS-GVO) are available for download here: